Your roof is not this house
Pitch, dormers, valleys and how much wall the roof meets all change how a color reads. We photograph your actual roof during the inspection so you choose against the real thing.

Four roof systems, thirty two colors and five gutter finishes on a 3D home you can turn, zoom and light. Change the roof and the gutters together, because they are the two things people regret picking separately.
A color chip in your hand and a full roof on a home are two different things. Pick the system, pick the color, then change the gutters. Drag the house to walk around it, and switch the light between morning, midday and golden hour to see how the roof reads.
1Roof system
2ColorGeorgetown Gray
3Gutters
Landmark Pro runs about 270 lb per square against 225 for standard Landmark, which is roughly 1,100 lb more material on a typical home. We do not install three tab in any color.
A visualizer is a starting point, not a specification. Three things decide how the roof actually turns out, and none of them are the color.
Pitch, dormers, valleys and how much wall the roof meets all change how a color reads. We photograph your actual roof during the inspection so you choose against the real thing.
Every monitor renders these differently, and weathering shifts most products over the first few years. We bring real sample boards to the house before anything gets ordered.
Flashing metal gets matched to the gutter metal, never copper against aluminum. Galvanic corrosion eats that joint from the inside and it is the kind of mistake you find years later.
The color is the last decision. These are fixed on every roof we install, and they are where a cheap quote quietly saves its money.
Close enough to compare against each other, and not close enough to order from. Every monitor renders these differently and most products shift over the first few years of weathering, so we bring real sample boards to the house before anything gets ordered.
Yes. Architectural shingle, standing seam metal, natural slate and cedar shake, plus the gutter finishes including copper. Nothing in the tool is something we would have to hand off to somebody else.
That is what the inspection visit is for. Your pitch, dormers, valleys and how much wall the roof meets all change how a color reads, so we photograph your actual roof and you choose against the real thing.
It changes the whole elevation more than people expect, which is why the tool lets you change both together. There is also a technical limit: flashing metal gets matched to the gutter metal and we never run copper against aluminum, because the two react and eat the joint from the inside.
What is underneath it. CertainTeed Landmark Pro at about 270 lb per square against 225 for standard, synthetic underlayment rather than felt, and proper drip edge. That is where a cheap quote quietly saves its money, and the color is the last decision, not the first.
We will bring real sample boards to the house, hold them against your brick and your trim, and quote the system properly. No charge and no pressure either way.