Type D profile
Type D has a longer kickout than the older Type C angle, so water clears the fascia instead of curling back to it. We run it at the eave and up every rake.

Drip edge is the metal that carries water off the deck and into the gutter instead of behind it. Virginia code requires it at the eave and the rake, and plenty of roofs in the DMV still do not have it.
The cheapest metal on your roof is the one that decides whether your fascia stays solid or quietly rots behind the gutter, and most homeowners never see it.
Related roofline work: fascia board replacement, rake board replacement and PVC trim installation.
Water clings to the underside of a shingle when it leaves the roof. Without a metal edge to break that surface tension, it runs back onto the fascia board and down the front of your gutter. We install Type D drip edge at both the eave and the rake, lapped so each piece sheds onto the one below it, with the eave leg landing inside the gutter.
Type D has a longer kickout than the older Type C angle, so water clears the fascia instead of curling back to it. We run it at the eave and up every rake.
Aluminum drip edge against aluminum gutter, steel against steel. Mixing metals at a wet joint sets up galvanic corrosion, and the cheaper metal is the one that gives out first.
At the eave the drip edge goes under the ice and water shield. At the rake it goes over. Reverse that order and you have built a funnel pointed at your sheathing.
Drip edge is fast to install and easy to skip, which is why it gets skipped. Here is how it goes on when we do it, and why the order matters as much as the metal.
Four questions. You get a straight read on whether this is a repair, a replacement, a gutter job or an insurance claim, and where to go next.
We cover Northern Virginia and the Fredericksburg area out of two offices. Search for your town, or pick it off the list to see the map and the local page.
No match in our service area. Call (703) 347-6482 anyway, we travel for larger jobs.
We get on the roof and photograph what we find before we quote. You see the same evidence we do.
One crew for the roof, the siding and the gutters, so nobody is blaming the other trade.
Virginia license 2705155080, CertainTeed ShingleMaster certified, fully insured on every job.
Photos and video through the whole install on CompanyCam, stored indefinitely, with a link that is yours to keep.
Yes. The code calls for it at the eave and the rake on asphalt roofs. Older homes built before the requirement often have none, and some have only the eave run. If yours is missing, we will show you the photos on your CompanyCam link before we quote anything.
Type C is a simple L angle. Type D adds a kickout at the bottom that pushes water away from the fascia before it drops. On a house with gutters, Type D is what you want, and it is what we carry from ABC Supply.
Along the eave, usually yes, especially if the gutters are coming off anyway. The rake is harder because the shingle edge has to lift and the starter has to be intact. We look first and tell you honestly whether the retrofit is worth doing.
Often it is. Water leaving the roof edge with nothing to break it will run the back of the board and blister paint from behind. Clogged gutters and a bad gutter apron do the same thing, so we check all three before recommending a fix.
Yes. Drip edge comes in standard colors and we match it to your trim or your gutter, whichever you would rather it disappear into. Mill finish aluminum is available too, but on most homes a color match reads cleaner from the ground.
Every town we cover has its own page with local detail. Pick yours.
Local pages for the towns we cover.
When a gutter backs up, water spills over the back edge and sits against the fascia, soffit and trim until the wood goes soft. New boards last when the gutter in front of them stays clear. Every cleaning visit includes a look at the roof edge, with photos.
Free inspection, free written estimate, no obligation. We will photograph the eave and the rake and tell you straight whether your drip edge is doing its job or quietly failing.
Tell us what you are seeing and we will get back to you to set a time.